Clipsal 920RM/1 Surge Protection Device (SPD), Clipsal Resi MAX, 1P Imax 20 kA
Code: SCH920RM/1
Unit of measure:
EACH
Description
Schneider Electric 920RM/1 Resimax Surge Arrestor, 1 Pole, 20KA
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
Remote signalling | without |
Relative humidity | 5-95 % |
Surge arrester class type | type 2 |
Ambient air temperature for operation | -25-60 °C |
Depth | 64mm |
Mounting support | 35mm DIN rail |
Mounting mode | clip-on |
Supplier ref | 920RM/1 |
Supplier Code | 920RM/1 |
Height | 85mm |
Poles description | 1P |
Maximum residual current | 0.6 mA |
Width | 18mm |
Maximum [Up] voltage protection level | <1.2 kV |
9 mm pitches | 2 |
Maximum discharge current | 20 kA |
Wire stripping length | 14mm |
Earthing system | TN-C |
[Ue] rated operational voltage | 240 V +/- 10 % AC 50/60 Hz |
IP degree of protection | IP20 |
Range | Resi MAX |
Standards | IEC 61643-11:2011 |
Surge arrester type | electrical distribution network |
Brand Name | Schneider Electric |
[Uc] maximum continuous operating voltage | 350 V |
Disconnector device type | fusible disconnect gG 125 A |
Local signalling | white/red flag |
Nominal discharge current | 5 kA |
Product or component type | surge arrester |
Connections - terminals | tunnel type terminal4-16mm² flexible with ferrule |
Have questions about this product?
Do you need more information? We are here to help. Click below to contact us now!
Get in touchWe would love your opinion
Was the information on this page helpful?