Schneider Electric RM35S0MW Modular speed Control Relay, Harmony Control Relays, 5A, 1CO, 24…240V AC DC
Code: SCHRM35S0MW
Unit of measure:
EACH
Description
SPEED CONTROL RELAY 24-240VAC/DC
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
Relative humidity | 95-95 % at 55-55 °C conforming to IEC 60068-2-30 |
[Us] rated supply voltage | 24...240 V AC/DC 50/60 Hz- non self-powered |
Dielectric test voltage | 2 kV AC 50 Hz |
Operating position | any position without derating |
Time delay type | adjustable 0.6...60 s Ti- inhibition time delay upon startup |
Maximum switching voltage | 250 V AC/DC |
Electromagnetic compatibility | emission standard for residential- commercial and light-industrial environments conforming to IEC 61000-6-3 |
Ambient air temperature for operation | -20-50 °C |
Minimum switching current | 10 mA at 5 V DC |
Supplier Code | RM35S0MW |
Impulse duration | >= 5 ms low state |
Ambient air temperature for storage | -40-70 °C |
Supply voltage limits | 20.4-264 V AC/DC |
Hysteresis | 5-5 % of threshold |
Vibration resistance | 1 gn (f= 57.6-150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 |
Repeat accuracy | +/- 0.5 % for time delay |
Non-dissipating shock wave | 4 kV |
Maximum power consumption in VA | 5 VA AC |
Shock resistance | 15 gn for 11 ms conforming to IEC 60255-21-1 |
Contacts type and composition | 1 C/O |
Insulation resistance | > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 |
Control type | without test button |
IP degree of protection | IP30 (casing) conforming to IEC 60529 |
Range | Harmony Control Relays |
Overvoltage category | III conforming to IEC 60664-1 |
Measurement range | 0.05...600 s |
Electrical durability | 100000 cycles |
Response time | 15 ms max (on crossing the threshold) |
Pollution degree | 3 conforming to IEC 60664-1 |
Tightening torque | 0.6-1 N.m conforming to IEC 60947-1 |
Maximum supply current for sensors | 40 mA for < 24 V DC at 25 °C |
Measurement accuracy | +/- 10 % of the full scale value |
Relay type | speed control relays |
Connections - terminals | screw terminals- 1 x 0.2...1 x 2.5mm² (AWG 24...AWG 12) flexible with cable end |
Time delay range | 0.6...60 s adjustable on energisation delay (tolerance: 0...10 % of the full scale value) |
Output contacts | 1 C/O |
Input compatibility | voltage input (E1)- 0...30 V- 9.5 kOhm- high state >= 4.5 V low state <= 1 V |
[In] rated current | 5 A |
Mounting support | 35mm symmetrical DIN rail conforming to IEC 60715 |
Mechanical durability | 30000000 cycles |
Polarity | reversible polarity on DC supply |
Relay monitored parameters | underspeed |
Threshold setting | 10...100 % |
Switching capacity in VA | 1250 VA |
Housing material | self-extinguishing plastic |
Width | 35mm |
Measurement error | < +/- 1 % over the whole range with voltage variation |
Status LED | 1 LED yellow for relay (R) |
Input frequency | 0.0017-20 Hz |
Nominal output current | 5 A |
[Uc] control circuit voltage | 24...240 V |
Compatibility code | RM3 |
Contacts material | cadmium free |
Relay name | RM35S |
[Ui] rated insulation voltage | 250 V conforming to IEC 60664-1 |
Marking | CE : 73/23/EEC |
Standards | IEC 60255-6 |
Control circuit voltage limits | - 15 % + 10 % Un |
Brand Name | Schneider Electric |
Product certifications | GL |
Supply frequency | 50/60 Hz +/- 10 % |
Operating rate | <= 360 operations/hour full load |
Reset time | 1 s supply Un in memory mode on time delay |
Immunity to microbreaks | 50 ms |
Utilisation category | DC-14 conforming to IEC 60947-5-1 |
Maximum power consumption in W | 3 W DC |
Product or component type | speed control relay |
Run-up delay at power-up | 0.05 s |
Have questions about this product?
Do you need more information? We are here to help. Click below to contact us now!
Get in touchWe would love your opinion
Was the information on this page helpful?