DIN CONTACTOR 2N/O CONTACTS 24VAC 25A | DIN Contactors | Electrical Distribution | All Categories

Schneider Electric A9C20132 iCT 25A 2NO 24V 50Hz contactor, White

Code: SCHA9C20132

Brand: Generic Brand

Unit of measure: EACH

Description

Schneider Electric A9C20132 iCT 25A 2NO 24V 50Hz contactor, White

This Acti9 iCT is a modular contactor. It is a 2P remote control device with 2 normally open contacts. The rated current is 25A for AC-7a and 8.5A for AC-7b. The Ue rated operational voltage is 250VAC. The Uc control voltage is 24VAC. This device could be used for control circuits. This device could be used for remote switching lighting loads, small motors (fans, mixers) or HVAC system applications. It is compatible with all the Acti9 control auxiliaries, for lighting, heating & ventilation control applications. This product is compliant with IEC/EN 61095. Electrical endurance goes up to 100000 cycles for AC-7A or AC-1, 30000 cycles for AC-7C, AC-7B, AC-3, AC-5A or AC-5B The maximum switching operations is 6 per minute. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 4kV. Pollution degree is 2. It is DIN rail mountable. Its width is 2 pitches of 9mm. The product color is white (RAL9003). The dimensions are (W) 81mm x (H) 18mm x (D) 68.5mm. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is from -5°C to 60 °C. The storage temperature is from -40°C to 70°C.

Features:
• Could be used for control circuits and remote switching small motors such as fans, mixers
• Compliant to IEC 61095 standard
• Mechanical contact position indicator
• Clip-on system for electrical and mechanical connections between contactors up to 25A and their auxiliaries

Technical Specifications

Looking for something specific? Search with keywords to help filter your required specifications.

Relative humidity	95-95 % at 55-55 °C
Ambient air temperature for operation	-5-60 °C
Noise level	30 dB
Mounting mode	clip-on
Switching frequency	100 switching operations/day
Supplier Code	A9C20132
Ambient air temperature for storage	-40-70 °C
Network frequency	50 Hz
9 mm pitches	2
360Image	https://visuals.se.com/A9C20132_Image-StopMotion/20200311T0941/360
Inrush power in VA	15 VA
Network type	AC
Hold-in power consumption in VA	3.8-3.8 VA
Control type	remote control
IP degree of protection	IP40 (modular enclosure) conforming to IEC 60529
Range	Acti9
Electrical durability	30000 cycles IEC/EN 61095 50 Hz AC-7C
Local signalling	action indicator
Pollution degree	2
Tightening torque	power circuit: 0.8-0.8 N.m
Market segment	small commercial
[Ie] rated operational current	8.5 A AC-7B
Connections - terminals	control circuit: tunnel type terminals2 cable(s) 1.5-2.5mm² flexible
Control signal type	maintained
Depth	68.5mm
Colour	White
Mounting support	35mm symmetrical DIN rail
Pole contact composition	2 NO
Power losses per pole	1.4 W
Mechanical durability	1000000 cycles
Height	81mm
Poles description	2P
Width	18mm
Operating altitude	2000 m
[Uc] control circuit voltage	24 V AC 50 Hz
Tropicalisation	2 conforming to IEC 1095
Device short name	iCT
Compatibility code	iCT
Product compatibility	iACTc
Device application	motor-heating-lighting
[Ue] rated operational voltage	250 V AC 50 Hz
Total power losses	2.8 W
[Ui] rated insulation voltage	500 V AC 50/60 Hz
Standards	IEC/EN 61095
Brand Name	Schneider Electric
Heat dissipation	1.3-1.3 W at 50/60 Hz
[Uimp] rated impulse withstand voltage	4 kV
Product name	Acti9 iCT
Maximum power	1.3 W at 250 V AC
Product or component type	contactor