Schneider Electric RM35TM250MW Modular motor voltage and temperature Control Relay, Harmony Control Relays, 5 A , 2 NO, 24..240 V AC/DC
Code: SCHRM35TM250MW
Unit of measure:
EACH
Description
PH FAIL ROT MOTOR TEMP 24-240VAC/DC
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
| Relative humidity | 95-95 % at 55-55 °C conforming to IEC 60068-2-30 |
| [Us] rated supply voltage | 24...240 V AC/DC 50/60 Hz- non self-powered |
| Dielectric test voltage | 2 kV- 1 min AC 50 Hz |
| Operating position | any position without derating |
| Time delay type | without |
| Maximum switching voltage | 250 V DC |
| Electromagnetic compatibility | emission standard for residential- commercial and light-industrial environments conforming to IEC 61000-6-3 |
| Ambient air temperature for operation | -20-50 °C |
| Minimum switching current | 10 mA at 5 V DC |
| Directives | 73/23/EEC - low voltage directive |
| Supplier Code | RM35TM250MW |
| Ambient air temperature for storage | -40-70 °C |
| Supply voltage limits | 20.4-264 V DC |
| Vibration resistance | 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1 |
| Resistance across terminals | 602 mOhm |
| Non-dissipating shock wave | 4 kV |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60255-21-1 |
| Contacts type and composition | 2 NO |
| Insulation resistance | > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5 |
| Control type | with test button |
| IP degree of protection | IP30 (casing) conforming to IEC 60529 |
| Range | Harmony Control Relays |
| Overvoltage category | III conforming to IEC 60664-1 |
| Measurement range | 208...480 V AC |
| Power consumption in VA | 0-4 VA at 24...240 V AC |
| Electrical durability | 10000 cycles |
| Response time | > 50 ms (input Y1 (contact Y1-T1) and push-button) |
| Local signalling | LED (yellow) for temperature of relay (R1) |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Tightening torque | 0.6-1 N.m conforming to IEC 60947-1 |
| Relay type | motor temperature control relay |
| Connections - terminals | screw terminals- 1 x 0.2...1 x 2.5mm² (AWG 24...AWG 12) flexible with cable end |
| Output contacts | 2 NO |
| Control circuit frequency | 50...60 Hz +/- 10 % |
| Measurement voltage limits | 176-528 V AC |
| Tripping threshold | 3100 Ohm +/- 10 % for temperature control circuit |
| Product specific application | for 3-phase supply |
| [In] rated current | 5 A |
| Mounting support | 35mm symmetrical DIN rail conforming to IEC 60715 |
| Reset threshold | 1650 Ohm +/- 10 % for temperature control circuit |
| Mechanical durability | 30000000 cycles |
| Relay monitored parameters | motor temperature via PTC probe |
| Maximum switching current | 5 A DC |
| Switching capacity in VA | 1250 VA |
| Housing material | self-extinguishing plastic |
| Width | 35mm |
| Voltage range | 176...528 V |
| Nominal output current | 5 A |
| [Uc] control circuit voltage | 24...240 V |
| Compatibility code | RM3 |
| Maximum resistance | 1500 Ohm for temperature sensor at 20 °C |
| Relay name | RM35TM |
| [Ui] rated insulation voltage | 400 V conforming to IEC 60664-1 |
| Marking | CE |
| Standards | IEC 60034-11-2 |
| Product certifications | UL |
| Brand Name | Schneider Electric |
| Short-circuit current | 0.007 A temperature sensing circuit (T1-T2 terminals short circuited) |
| Supply frequency | 50/60 Hz +/- 10 % |
| Operating rate | <= 360 operations/hour full load |
| Immunity to microbreaks | 20 ms at 20.4 V |
| Reset time | 10000 ms output |
| Utilisation category | AC-12 conforming to IEC 60947-5-1 |
| Maximum power consumption in W | 0.5 W DC |
| Net weight | 0.13 kg |
| Product or component type | motor temperature control relay |
| Run-up delay at power-up | 500 ms |
We would love your opinion
Was the information on this page helpful?
Thanks for your feedback!
Can't find what you're looking for?
Request now
We can source just about anything, submit a request and we'll get back to you soon.