Schneider Electric RM35JA32MR current control relay, Harmony Control Relays, 5A, 2CO, 0.15…15A, 24…240V AC DC
Code: SCHRM35JA32MR
Unit of measure:
EACH
Description
CURRENT CONTROL RELAY RM35-JA - RANGE 0
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
Relative humidity | 93-97 % at 25-55 °C conforming to IEC 60068-2-30 |
[Us] rated supply voltage | 24...240 V AC/DC 50/60 Hz- non self-powered |
Dielectric test voltage | 2.5 kV- 1 min AC 50 Hz conforming to IEC 60255-27 |
Time delay type | adjustable 0.1...30 s- +/- 10 % of the full scale value Tt- time delay upon fault |
Safety reliability data | B10d = 270000 |
Maximum switching voltage | 250 V AC |
Electromagnetic compatibility | surge immunity test - test level: 2 kV level 4 (differential mode) conforming to IEC 61000-4-5 |
Ambient air temperature for operation | -20-60 °C at 50 Hz |
Minimum switching current | 10 mA at 5 V DC |
Supplier Code | RM35JA32MR |
Ambient air temperature for storage | -40-70 °C |
Supply voltage limits | 20.4-264 V AC/DC |
Hysteresis | 3-3 % fixed of full scale for window mode |
Vibration resistance | 1 gn (f= 10-58.1 Hz) not in operation conforming to IEC 60068-2-6 |
Resistance across terminals | 0.015 Ohm at E2-M terminals |
Repeat accuracy | +/- 2 % for time delay |
Insulation | between supply and measurement |
Maximum power consumption in VA | 3.5 VA |
Shock resistance | 5 gn (duration = 11 ms) for in operation conforming to IEC 60068-2-27 |
Contacts type and composition | 2 C/O |
Insulation resistance | > 100 MOhm at 500 V DC conforming to IEC 60255-27 |
Control type | with test button |
IP degree of protection | IP50 (front panel) conforming to IEC 60529 |
Range | Harmony Control Relays |
Overvoltage category | III conforming to UL 508 |
Measurement range | 150 mA...15 A AC/DC |
Electrical durability | 100000 cycles |
Response time | <= 500 ms (on crossing the threshold) |
Functionality | overcurrent or undercurrent detection |
Local signalling | LED (green) for power ON |
Setting accuracy of the switching threshold | +/- 10 % of the full scale |
Pollution degree | 3 conforming to UL 508 |
Tightening torque | 0.6-1 N.m conforming to IEC 60947-1 |
Relay type | current control relay |
Connections - terminals | screw terminals- 2 x 0.2...2 x 1.5mm² (AWG 24...AWG 16) flexible with cable end |
Output contacts | 2 C/O |
Maximum measuring cycle | 100 ms measurement cycle as true rms value |
Setting accuracy of time delay | 10 P |
[In] rated current | 8 A |
Time delay drift | <= 1 % within the supply voltage range |
Mounting support | 35mm DIN rail conforming to IEC 60715 |
Mechanical durability | 10000000 cycles |
Environmental characteristic | 3K3 C |
Relay monitored parameters | overcurrent or undercurrent in window mode |
Maximum switching current | 8 A AC |
Threshold setting | 10...100 % |
Switching capacity in VA | 2000 VA |
Housing material | self-extinguishing plastic |
Width | 35mm |
Measurement error | 0.05 %/°C with temperature variation |
Nominal output current | 8 A |
[Uc] control circuit voltage | 24...240 V |
Compatibility code | RM3 |
Contacts material | cadmium free |
Relay name | RM35JA |
Standards | IEC 60255-1 |
Control circuit voltage limits | - 15 % + 10 % Un |
Internal input resistance | 0.005 Ohm |
Brand Name | Schneider Electric |
Product certifications | RCM |
Reset time | 1500 ms at maximum voltage |
Switching threshold drift | <= 1 % within the supply voltage range |
Immunity to microbreaks | 50 ms |
Utilisation category | AC-1 conforming to IEC 60947-4-1 |
Maximum power consumption in W | 1.5 W DC |
Net weight | 0.12 kg |
Product or component type | current control relay |
Run-up delay at power-up | 0.3 s |
We would love your opinion
Was the information on this page helpful?
Thanks for your feedback!
Can't find what you're looking for?
Request now
We can source just about anything, submit a request and we'll get back to you soon.