PH FAIL ROT MOTOR TEMP 24-240VAC/DC | Relays & Timers | Control & Indication | Industrial | All Categories

Schneider Electric RM35TM250MW Modular motor voltage and temperature Control Relay, Harmony Control Relays, 5 A , 2 NO, 24..240 V AC/DC

Code: SCHRM35TM250MW

Brand: Generic Brand

Unit of measure: EACH

Description

PH FAIL ROT MOTOR TEMP 24-240VAC/DC

Technical Specifications

Looking for something specific? Search with keywords to help filter your required specifications.

Relative humidity	95-95 % at 55-55 °C conforming to IEC 60068-2-30
[Us] rated supply voltage	24...240 V AC/DC 50/60 Hz- non self-powered
Dielectric test voltage	2 kV- 1 min AC 50 Hz
Operating position	any position without derating
Time delay type	without
Maximum switching voltage	250 V DC
Electromagnetic compatibility	emission standard for residential- commercial and light-industrial environments conforming to IEC 61000-6-3
Ambient air temperature for operation	-20-50 °C
Minimum switching current	10 mA at 5 V DC
Directives	73/23/EEC - low voltage directive
Supplier Code	RM35TM250MW
Ambient air temperature for storage	-40-70 °C
Supply voltage limits	20.4-264 V DC
YoutubeVideo1	https://www.youtube.com/embed/2fJJKGUbG-s?si=_IafyjQ9A1o6dRkj
Vibration resistance	1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1
Resistance across terminals	602 mOhm
360Image	https://visuals.se.com/RM35TM250MW_360/20220225T1453/360
Non-dissipating shock wave	4 kV
Shock resistance	15 gn for 11 ms conforming to IEC 60255-21-1
Contacts type and composition	2 NO
Insulation resistance	> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5
Control type	with test button
IP degree of protection	IP30 (casing) conforming to IEC 60529
Range	Harmony Control Relays
Overvoltage category	III conforming to IEC 60664-1
Measurement range	208...480 V AC
Power consumption in VA	0-4 VA at 24...240 V AC
Electrical durability	10000 cycles
Response time	> 50 ms (input Y1 (contact Y1-T1) and push-button)
Local signalling	LED (yellow) for temperature of relay (R1)
Pollution degree	3 conforming to IEC 60664-1
Tightening torque	0.6-1 N.m conforming to IEC 60947-1
Relay type	motor temperature control relay
Connections - terminals	screw terminals- 1 x 0.2...1 x 2.5mm² (AWG 24...AWG 12) flexible with cable end
Output contacts	2 NO
Control circuit frequency	50...60 Hz +/- 10 %
Measurement voltage limits	176-528 V AC
Tripping threshold	3100 Ohm +/- 10 % for temperature control circuit
Product specific application	for 3-phase supply
[In] rated current	5 A
Mounting support	35mm symmetrical DIN rail conforming to IEC 60715
Reset threshold	1650 Ohm +/- 10 % for temperature control circuit
Mechanical durability	30000000 cycles
Relay monitored parameters	motor temperature via PTC probe
Maximum switching current	5 A DC
Switching capacity in VA	1250 VA
Housing material	self-extinguishing plastic
Width	35mm
Voltage range	176...528 V
Nominal output current	5 A
[Uc] control circuit voltage	24...240 V
Compatibility code	RM3
Maximum resistance	1500 Ohm for temperature sensor at 20 °C
Relay name	RM35TM
[Ui] rated insulation voltage	400 V conforming to IEC 60664-1
Marking	CE
Standards	IEC 60034-11-2
Product certifications	UL
Brand Name	Schneider Electric
Short-circuit current	0.007 A temperature sensing circuit (T1-T2 terminals short circuited)
Supply frequency	50/60 Hz +/- 10 %
Operating rate	<= 360 operations/hour full load
Immunity to microbreaks	20 ms at 20.4 V
Reset time	10000 ms output
Utilisation category	AC-12 conforming to IEC 60947-5-1
Maximum power consumption in W	0.5 W DC
Net weight	0.13 kg
Product or component type	motor temperature control relay
Run-up delay at power-up	500 ms