Schneider Electric RM17TA00 Modular multifunction 3-phase supply Control Relay, Harmony Control Relays, 5 A, 1 CO, 208...480 V AC
Code: SCHRM17TA00
Unit of measure:
EACH
Description
RELAY PHASE SEQ/FAIL ASYMM 208-480VAC
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
Relative humidity | 95-95 % at 55-55 °C conforming to IEC 60068-2-30 |
[Us] rated supply voltage | - self-powered |
Dielectric test voltage | 2 kV- 1 min AC 50 Hz conforming to IEC 60664-1 |
Operating position | any position without derating |
Time delay type | adjustable 0.1...10 s- +/- 10 % of the full scale value Tt- time delay upon fault |
Safety reliability data | B10d = 470000 |
Maximum switching voltage | 250 V AC |
Electromagnetic compatibility | immunity for industrial environments conforming to IEC 61000-6-2 |
Ambient air temperature for operation | -20-50 °C |
Minimum switching current | 10 mA at 5 V DC |
Supplier ref | RM17TA00 |
Directives | 73/23/EEC - low voltage directive |
Supplier Code | RM17TA00 |
Supply voltage limits | 183-528 V AC |
Ambient air temperature for storage | -40-70 °C |
Hysteresis | 2-2 % |
Vibration resistance | 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1 |
Repeat accuracy | 3 % for time delay |
Non-dissipating shock wave | 4 kV conforming to IEC 61000-4-5 |
Shock resistance | 15 gn for 11 ms conforming to IEC 60255-21-1 |
Contacts type and composition | 1 C/O |
Control type | without test button |
Insulation resistance | > 500 MOhm at 500 V DC conforming to IEC 60664-1 |
IP degree of protection | IP30 (casing) conforming to IEC 60529 |
Range | Harmony Control Relays |
Overvoltage category | III conforming to IEC 60664-1 |
Measurement range | 208...480 V AC |
Power consumption in VA | 0-22 VA at 400 V AC 50 Hz |
Electrical durability | 100000 cycles |
Response time | < 200 ms (in the event of a fault) |
Functionality | asymmetry |
Local signalling | LED (yellow) for relay ON |
Pollution degree | 3 conforming to IEC 60664-1 |
Tightening torque | 0.6-1 N.m conforming to IEC 60947-1 |
Relay type | multifunction control relay |
Connections - terminals | screw terminals- 2 x 0.2...2 x 1.5mm² (AWG 24...AWG 16) flexible with cable end |
Output contacts | 1 C/O |
Control circuit frequency | 50...60 Hz +/- 10 % |
Measurement voltage limits | 183-528 V AC |
Maximum measuring cycle | 150 ms measurement cycle as true rms value |
Product specific application | for 3-phase supply |
[In] rated current | 5 A |
Mounting support | 35mm symmetrical DIN rail conforming to IEC 60715 |
Mechanical durability | 30000000 cycles |
Relay monitored parameters | phase failure detection |
Maximum switching current | 5 A DC |
Switching capacity in VA | 1250 VA |
Housing material | self-extinguishing plastic |
Width | 17.5mm |
Measurement error | < 1 % over the whole range with voltage variation |
Voltage range | 208...480 V phase to phase |
Nominal output current | 5 A |
[Uc] control circuit voltage | 208...480 V |
Phase failure sensitivity | 0.7 Un |
Compatibility code | RM17 |
Relay name | RM17TA |
Marking | CE |
[Ui] rated insulation voltage | 400 V conforming to IEC 60664-1 |
Standards | IEC 60255-1 |
Control circuit voltage limits | - 12 % + 10 % Un |
Brand Name | Schneider Electric |
Product certifications | CSA |
Supply frequency | 50/60 Hz +/- 10 % |
Operating rate | <= 360 operations/hour full load |
Reset time | 1500 ms time delay |
Utilisation category | DC-13 conforming to IEC 60947-5-1 |
Adjustment of asymmetry threshold | 5...15 % of Un selected |
Net weight | 0.13 kg |
Product or component type | 3-phase control relay |
Run-up delay at power-up | 650 ms |
Have questions about this product?
Do you need more information? We are here to help. Click below to contact us now!
Get in touchWe would love your opinion
Was the information on this page helpful?