Description
Contactor 45.0kW 3 Pole, 85.0 Amp AC-3,CA7 Series, No Auxilary Contacts 240Volt AC Coil DIN-rail/screw Mount
Features:
• The CA7 contactor series represents the most modern and flexible IEC power contactor available today. A wide selection of contactors covers the entire CA7 horsepower range (up to 75HP @ 460/575V). Six of the contactors are only 45mm wide, an extremely small footprint for such rugged performance.
• All CA7 contactors are stocked and delivered with the coil terminals located on the line side (top) of the contactor.
• This is the typical configuration when using the contactor with an overload relay. When the contactor is used with the KT7 Motor Circuit Controller, the coil must be reversed, so that the coil terminals are located at the load side (bottom) of the contactor.
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
| Poles | 3-Pole |
| Category | Contactor & Accessories |
| Standard | cULus, CE, UL, CSA |
| HP Rating | 25 hp at 200 V, 30 hp at 230 V, 60 hp at 460 V, 60 hp at 575 V |
| Voltage type for actuating | AC |
| Number of normally closed contacts as main contact | 0 |
| Kilowatt Rating | 45.0kW |
| Depth | 125.5mm |
| Power consumption - AC coil hold-in | 19.6VA |
| Coil Power Rating | 45 kW |
| Power consumption - AC coil pickup | 235VA |
| Rated operation current Ie at AC-4 - 400V | 38A |
| Number of auxiliary contacts as normally open contact | 0 |
| Voltage | 400/415/690 VAC |
| Supplier Code | CA78500240VAC |
| UNSPCS | 39121529 |
| Height | 122mm |
| Rated operation current Ie at AC-3 - 400V | 85A |
| Rated operation current Ie at AC-1 - 400V | 100A |
| Width | 72mm |
| Number of auxiliary contacts as normally closed contact | 0 |
| Control supply voltage Us at AC 50HZ | 240V |
| Control supply voltage Us at AC 60HZ | 277V |
| Type of electrical connection of main circuit | Screw connection |
| Maximum Load Current | 85 A |
| Rated operation power at AC-3 - 690 V | 45kW |
| Rated operation power at AC-4 - 400V | 20kW |
| Dimensions | 4-49/64 Inch Height x 2-53/64 Inch Width |
| Operating Cycles | 5000000 |
| Range | CA7 Series |
| Max. rated operation voltage Ue AC | 690V |
| Weight | 1.45kg |
| Number of normally open contacts as main contact | 3 |
| Brand Name | NHP |
| Item Name | Contactor |
| Type | Non-Reversing |
| Contact Configuration | No Auxilary Contacts |
| IP Rating | IP2X |
| Mounting method | Screw mounting |
| Coil Voltage | 240Volt AC Coil |
| ETIM Class | Power contactor - AC switching |
| Number of Poles | 3 |
| Rated Current | 85.0 Amp AC-3 |
| Rated operation power at AC-3 - 400V | 45kW |
| Rated operation current Ie at AC-3 - 690 V | 49A |
We would love your opinion
Was the information on this page helpful?
Thanks for your feedback!
We can source just about anything, submit a request and we'll get back to you soon.